Manualshelf

Installation manual

ManualsBrandsPrime Security ManualsAutomotivePrime AMX 38
71727374757677787980
-74-
10.6.8: Dial Tone Wait
This option determines whether the system dials only when the dial tone is present or if
the dialing is initiated regardless of the dial tone.
To program the Dial Tone Wait option:
1. From the Programming menu, select Communications, Comm.
Options, Dial Tone Wait [95408].
2. Select Enabled or Disabled.
10.6.9: RDM Period
Remote Diagnostics and Maintenance (RDM) session is a feature that is designed to
enable automated maintenance of installed control systems. During a maintenance session,
the control system automatically dials the RP Callback number and connects to the RDM
server. The time interval between maintenance sessions is called the RDM period.
To program the RDM period:
1. From the Programming menu, select Communications, Comm.
Options, RDM Period [95409].
2. Enter the required RDM period (001-255 days or 000 to disable
RDM communication).
3. Press when the desired setting is displayed.
10.6.10: Incoming Calls
This option determines whether the control system is able to receive incoming
Telecontrol/Two-Way Audio calls.
To program the Incoming Calls option:
1. From the Programming menu, select Communications, Comm.
Options, Incoming Call [95410].
2. Select Enabled or Disabled.
10.6.11: Telecontrol/Vocal Message Timeout
The Telecontrol/Vocal Message Timeout (TC/VM Timeout) determines the duration of a
Telecontrol, Two-Way Audio or Vocal Message call. In the case of a Telecontrol or Two-
Way Audio call, when the time out expires, the system automatically disconnects unless
the call is manually extended by the operator. For Vocal Message calls, if the time out
expires and the user has not acknowledged the message, the system attempts to call the
next VM account’s telephone number. During a Vocal Message call, the timeout is reset
each time a message is acknowledged.
To program the Telecontrol/Vocal Message Timeout:
1. From the Programming menu, select Communications, Comm.
Options, TC/VM Timeout [95411].
2. Enter a time (001-255 seconds).
3. Press when the desired setting is displayed.
10.6.12: TWA Mode
The Two-Way audio features offer a choice of two operation modes:
• Duplex – both parties may speak at once just like a regular telephone.
• Simplex – one party may speak while the other party listens.