Manualshelf

Installation Guide

ManualsBrandsPrime-Line ManualsPlumbingGarbage Disposal Flange with Stopper 3-1/2 in. Chrome with Putty
1
Rapid Ring plumbers putty
pre-installed! Gently pull
away and DISCARD plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and DISCARD plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and DISCARD plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and DISCARD plastic
friction washer BEFORE
setting into sink!
1. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and discard.
2. Clean sink opening and insert
complete body assembly above
sink through opening.
Rapid Ring plumbers putty
pre-installed. Simply position body
centered in sink opening. Make sure
your sink is compatible with standard
plumbers putty.
Note: Putty will begin to compress against inside
of sink bowl. After assembly is securely tightened,
remove and discard excess putty.
1. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and discard.
2. Clean sink opening and insert
complete body assembly above
sink through opening.
Rapid Ring plumbers putty
pre-installed. Simply position body
centered in sink opening. Make sure
your sink is compatible with standard
plumbers putty.
Note: Putty will begin to compress against inside
of sink bowl. After assembly is securely tightened,
remove and discard excess putty.
1. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and discard.
2. Clean sink opening and insert
complete body assembly above
sink through opening.
Rapid Ring plumbers putty
pre-installed. Simply position body
centered in sink opening. Make sure
your sink is compatible with standard
plumbers putty.
Note: Putty will begin to compress against inside
of sink bowl. After assembly is securely tightened,
remove and discard excess putty.
1. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and discard.
2. Clean sink opening and insert
complete body assembly above
sink through opening.
Rapid Ring plumbers putty
pre-installed. Simply position body
centered in sink opening. Make sure
your sink is compatible with standard
plumbers putty.
Note: Putty will begin to compress against inside
of sink bowl. After assembly is securely tightened,
remove and discard excess putty.
Sink
Sink
Sink
Sink
Style “G”
Style “G”
Style “G”
Style “G”
Sink
Sink
Sink
Sink
Body assembly
Body assembly
Body assembly
Body assembly
RP-INS-G
RP-INS-G
RP-INS-G
RP-INS-G

Summary of content (1 pages)