User Manual

network that you will be connecting to. Set the Operating Mode,

Encryption settings, Network Type, SSID, etc. When you have finished

making these settings, click “Apply” (b).

A profile with the name you chose now exists in the Profile Manager.

You can

select this profile quickly and easily any time you need to use it

Choosing a Profile

You can quickly and easily choose a profile any time you need it. There

are two

methods to do so.

Quick Pick

1. Right-click the Utility icon in the task bar.

Place your cursor over “Profile”. A list of the

profiles you have created will appear. Move the

cursor over the profile that you want to use and

left-click on the name. The profile you just

selected will become active.

Choosing from the Utility

1. Make sure Profile Manager mode is on.

2. Click the down-facing arrow next to “Profile Name”. A list of all of the

profiles you have created will appear. Click on the name of the profile

you

want to use.

3. Click “Apply”. The profile you just selected will become active.

USING THE BELKIN WIRELESS LAN MONITOR

UTILITY

Operating in Ad-Hoc Mode

Ad-Hoc mode is a peer-to-peer mode (computer-to-computer). To set

two or

more computers to communicate directly with each other, follow these

steps.

1. Select “Ad-Hoc” from the Operating Mode box (a).

2. Enter the channel you want to use in the “Channel” box (b). You can

choose any one of the available channels you wish.

3. In the SSID field (c), type in the name you want to use to identify the

Ad-Hoc network. You can name this anything you want.