User Manual

that needs
to communicate on the wireless network must be set to the same
encryption
settings (rate, passphrase, and key).
a
b
d
c
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
19
Setting 64-Bit or 128-Bit Manually Using an Alphanumeric
Keyword (Advanced)
1. Select “64-bit” or “128-bit” encryption from the drop-down menu.
2. Select “Manual Entry” then
“Alphanumeric: 5 characters” if
using 64-bit or “Alphanumeric: 12
characters” if using 128-bit. Enter
up to four keys.
3. Select the key that you want to use.
4. Click “Apply”.
Encryption is now enabled. Each wireless-equipped computer (client)
that needs
to communicate on the wireless network must be set to the same
encryption
settings (rate, passphrase, and key).
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
Setting 64-Bit or 128-Bit Manually Using a Hexadecimal Key
(Advanced)
1. Select “64-bit” or “128-bit” from the drop-down menu.
2.
Select “Manual Entry” then
“Hexadecimal: 10 characters (0-9,A-F)”
if using 64-bit or “Hexadecimal: 26
characters (0-9,A-F)” if using 128-bit.
Enter up to four keys.
3. Select the key that you want to use.