User's Manual

10
Video Sender Manual Version 5/2
b. set by optional remote handheld
Channel select
Press “CH1”, ”CH2”, ”CH3”, ”CH4” to select the channel you want to
receive.
Scan mode channel selection
If you want to receive channel 2 and 4 sequentially :
1. Press “PRGM”, all 4 channel indicator will be lit.
2. Press “CH2”, CH 2 indicator will be flash.
3. Press “CH4”, CH4 indicator will be flash too.
4. Press “PRGM”, all 4 channel indicator will be flash quickly for 5
times.
Start the scan mode
Press “SCAN” then the receiver will start to scan the channel you set.
The current channel indicator will flash during scan mode.