User's Manual

9
Video Sender Manual Version 5/2
4 Channel and dwell time selection
4.1 Transmitter channel setting
The transmitter of video sender can send A/V source by the channel that you
selected. You can use up to 4 transmitter in the same time, but make sure
each transmitter is set in different channel. Receiver can receive all channel
sequentially as you specified.
For example as the figure, A/V signal was send
by channel 1.
4.2 Receiver setting
You can set received channel and dwell time by two way :
 Set channel and dwell time at back panel.
 Use optional remote handheld to select channel .
a. set at back panel
For example as the figure, it will receive
channel 3.
For example as the figure, it will receive
channel 1 and 3 sequentially with 2
seconds dwell time.
There have 4 different dwell time can be selected by changing switch
number 5 and 6 as following figure.
1 2 3 4
CHANNEL
CH T
1 2 3 4 5 6
CH T
1 2 3 4 5 6
T
5 6
16 seconds
T
5 6
2 seconds
T
5 6
4 seconds
T
5 6
8 seconds
on
on