User's Manual

8
Video Sender Manual Version 5/2
3.2 Receiver :
 Make sure the ON/OFF switch is at the OFF position before setup.
 Connect power adaptor to receiver.
 Plug power adaptor to wall outlet.
 Connect receiver to TV set or other A/V displays.
 Set the receiving channel same as transmitter at back panel of receiver.
See “Channel and dwell time selection” to setup channel.
 Turn the ON/OFF switch to ON position, the related channel indicator
should be lit.
ANTENNA
IN
RF IN
A/V1 A/V2
To wall outlet
TV
L - AUDIO - R
DC 12V IN
VIDEO
A/V Cable
OFF
ON
T
CH
Note : If the accessory cable are euro/scart, they are different cable for
transmitter and receiver. There has indicator on scart connector,
please follow the indicator to install.
For RCA cable they are identically.