User's Manual

12
☆ 如果你的 Wi-Fi 是被设置隐藏，则不会被自动搜索出来。需要点击添加网络 ，然后
输入相应信息来添加你的
Wi-Fi 。
Wi‐FiNetworkSetup

SincemanyfeaturesrequiretheWi‐Ficonnection,itisrecommendedthatyouusebeforeyousetuptheWi‐Fi
network.
1. Tap → Settings.
2. SlideWi‐Fiswitchtoturnon.
3. The device automatically scans and lists all local Wi‐Fi Network found. A lock
indicatessecureWi‐Finetworksthatrequireinputpasswordtoconnect.
4. Tap the desired network to which you want to connect
→ enter the Network
Passwordifapplicable
→ tapConnect.
5. Tap
toreturntotheDesktopscreen.
☆ If your Wi-Fi network is set as hidden, it won’t be found by the auto scan.
Tap Add Wi-Fi network and follow the prompts to add your network.
USB 设备模式选项
使用前先通过 MircoUSB 线将设备和 PC 连接。
USBdevicemodeoptions
Before using this feature please connect to PC via the Mini USB cable.
USB 调试
USB 调试模式用于给开发人员调试程序，使用此模式前需要安装 ADB 驱动，安装方法如下：
（1）首先在设备上切换到
安装驱动模式，然后在您的 PC 上找到“CD 驱动器”（例如 F：），
用资源管理器打开，将\adb_driver 文件夹下的全部文件拷贝到 PC 上；
（2）然后在设备上切换到 USB 调试模式，如果 PC 端提示安装驱动，选择手动安装，并
将驱动路径指定为您保存 adb 驱动的相应位置即可。
USB debugging
USB debug mode used to debug program for developers. ADB driver needs to be installed before using this
mode, Installation method as follows：
（1）First switch on the device to
Install Driver mode, And then find the "CD driver"(such as F:)on
your PC，Use the resource manager to open the CD drive , then copy all files in the folder(\adb_driver) to your
PC;
（2）And then switch to
USB debugging mode on the device, If the PC-side prompts to install the driver, select
manual installation, and specify the drive path to the location where you saved the ADB driver.
媒体传输协议(MTP)
媒体传输协议(MTP)用于同步传输文件以及对设备中的文件进行复制、粘贴、删除等操作，
如果是第一次在您 PC 上使用此模式，需要安装驱动程序；安装方法为：
在设备上切换到
安装驱动模式，您的 PC 会自动弹出驱动程序安装界面，用户只需要
按照提示操作即可，安装完后需要重启系统。（如果还不可以使用，请去 Microsoft 官
网下载 Media Player 11 升级包即可。）
Media Transfer Protocol (MTP)
Media transfer protocol (MTP) mode used to synchronize transmits data and the users can copy, paste or delete
the files in the device. If this is the first time using this mode on your PC, you need to install the driver.
Installation method as follows：
Firstly, switch to
Install Driver mode on the device, and then your PC will automatically pop-up
driver installation interface, users need only follow the prompts, and reboot the system after the installation