User's Manual

HOW DO I?
24
MY PASSPORT WIRELESS
USER MANUAL
Upgrade Firmware
The Firmware page allows you to update the My Passport Wireless firmware automatically or
to manually check for and install an update file.
Click Firmware on the navigation bar to display the Firmware page.
The current version and last update display in the Version section.
Updating with Available Firmware
You can check for available updates at any time in the Available Updates area.
1. Click Check for Update.
2. Review the Update Firmware screen that displays.
3. If an update is available, click Install and Reboot.
When the update is complete, your drive reboots.
Performing a Manual Update
1. Click the Online location of the WD My Passport Wireless firmware link. (NEED THIS
LINK)
2. Download the latest firmware file.
3. In the Manual Update section, click Update from File.
4. Navigate to the firmware update file and click Open.
5. Review the confirmation message and click Install and Reboot. The update installs on
your device.
When the update is complete, your drive reboots.
WARNING! Do not power off your drive during the installation. When the
installation is finished, your drive will automatically reboot.