User's Manual

7
EN
Charging the Battery
Before using Smart Badge, you must charge the product for approximately 5 hours. Once the
battery is fully charged, it will provide up to 40 hours of talk time and up to 600 hours of standby
time.
1. Connect the charger cable to the Smart Badge.
2. Plug the AC adapter into a wall outlet. When the Smart Badge is charging, a red
indicator light will appear and stay lit.
3. Once the battery is fully charged, the green indicator light will come on. Unplug the
charger cable from the wall outlet and from your Smart Badge.
Pairing Smart Badge with Your Mobile Phone
Pairing is the process of linking your Smart Badge to your Bluetooth-enabled mobile phone.
Once this process is complete, you can only use your Smart Badge with this particular mobile
phone. If you want to use the Smart Badge with another mobile phone, you must repeat the
pairing process again. Smart Badge can be paired with up to 8 compatible phones, although
it can only be connected to one phone at a time.
1. Make sure that your phone is turned on and no more than 10 meters away from your
Smart Badge.
2. Turn on your Smart Badge and make sure it is charged. Press and hold down both the
Power key and the Volume down key at the same time for 2 seconds. The green and
red LEDs will then start to flash in turns. Release all of the buttons, after which Smart
Badge is in pairing mode.
BHS-608_UG_en.fm Page 7 Wednesday, August 10, 2005 4:27 PM