User's Manual

10
Powering Up
To turn on the Smart Badge
Press and hold down the Power key for 2 seconds. The Smart Badge will beep and the green
indicator light start to blink. The blinking will continue for approximately 10 minutes or until the
headset is connected to a compatible phone. If the headset cannot be connected to a phone
during this time, the Smart Badge will turn off.
To turn off the Smart Badge
Press and hold down the Power key for 2 seconds. The Smart Badge will beep and the red
indicator light will be briefly displayed.
Making Calls
Once the Smart Badge has been connected to a phone, calls can be placed by using the
phone in the normal way. Note that the call functions depend on what phone you are using.
Answering and Ending a Call
When you receive a call, you will hear a ringing tone through the headset and receive a
vibration alert. Press the Send/End key to answer the call or to end the currently active call.
You can also answer and end the call using the phone.
BHS-608_UG_en.fm Page 10 Wednesday, August 10, 2005 4:27 PM