User Manual

Question: The mouse pointer is not moving. What should I do?
Answer: Ensure all setup procedures have been followed correctly. If software and drivers
have already been installed, remove these, reboot your computer and re-install.
Clean the mouse lens with a cotton swab. Do not use any other materials or solvents to
clean the mouse lens as this may result in damage to the lens.
As this is an optical device, it is important to use it on an appropriate surface. If the surface
you are using your mouse on is red in color or highly reflective, the surface may be the
source of the problem. Use either a mouse mat or change to a more neutral-colored
surface.
Ensure that batteries are not out of power. Replace batteries if necessary.
Question: The mouse pointer is moving abnormally. What should I do?
Answer: The likely cause of this problem is debris around or on the lens which is
interfering with the optical signal. Clean the mouse lens with a cotton swab. Do not use any
other materials or solvents to clean the mouse lens as this may result in damage to the
lens.
If the mouse pointer continues to move abnormally after cleaning, re-install the drivers and
software.
Low Battery Notification
When the mouse is running out of power, a Notification window will pop up on the screen.
Replace the batteries to continue to use the mouse.
Note: It is recommended to only use high-capacity alkaline batteries with this product.