User's Manual

- 5 -
Maintenance
If the pointer skips or move abnormally, clean the ball of your mouse by following these
steps:
• Remove the retainer ring to remove the ball.
• Wipe the ball with a clean, lint-free cloth, and then blow carefully into the ball-cage to dislodge
dust and lint.
• If the rollers are dirty, clean the rollers using a cotton swab moistened lightly with isopropyl
(rubbing alcohol). After cleaning, make sure the rollers are still centered in their channels. Make
sure that fluff from the swab is not left on the rollers.
• Replace the ball and retainer ring.
Technical Support
If you are experiencing difficulty with the installation or use of Mouse Suite
™
, please contact
our Technical Support staff. We will be more than happy to assist you with any problems you
may have.