User's Manual
Table Of Contents
- Table of Contents
- Preface
- Introducing your Mouse
- Setting Up your Mouse
- Connecting your Mouse
- 1. Push the battery/USB receiver compartment eject button down to open the compartment cover.
- 2. Pull out the USB receiver.
- 3. Connect the USB receiver to a free USB port on your notebook as shown below.
- 4. Turn over the mouse and switch the power button to the ON position. The computer will automatically detect the mouse.
- Using your Mouse
- Troubleshooting
- Specifications
- Legal notices
Mouse User Manual
6
Using your Mouse
Press the left and right mouse buttons to perform standard
left and right button functions.
Use the scroll wheel to scroll up and down the screen. You can
also press and hold the scroll button inwards, then move the
mouse up and down to scroll up and down the screen.
Troubleshooting
If you have any problems with your mouse, please check the
following:
• Check the system requirements to make sure that your sys-
tem is compatible.
• Check to see if the USB receiver is securely connected to
your PC via a USB port. A loose connection may cause a
malfunction in the connection.
• If the mouse fails to work, check the USB mouse function
in your system’s BIOS. The function should be enabled for
normal use.
• If your PC BIOS setup has mouse options, make sure they
are set to default settings. If you are not familiar with the
BIOS, refer to your PC’s manual for more information.
• Only use the mouse on a clean, flat, non-slippery surface
in order to ensure smooth and accurate cursor action.
For further assistance with any other questions you may have,
please contact your dealer for technical support.