User's Manual

ID Mode Settings
Non-ID Mode (Default)
By default, your receiver operates in Non-ID Mode. To avoid interferences with other devices, it is recommended that you leave your receiver in this mode.
ID Mode
If you are experiencing disturbances from other devices, you can switch to ID Mode. To switch to ID Mode, press the small black button located on the top of the receiver, Press the
small black button located on the bottom of the mouse .the LED on receiver turns off after release the small black button located on the bottom of the mouse ,ID mode is active.
Note: By replacing the batteries, your mouse will automatically revert to its default Non-ID Mode. You will need to repeat this procedure to continue using your mouse in ID Mode.
To return to Non-ID Mode from ID Mode,.Press the small black button located on the top of the receiver for approximately 5 seconds. The light will dim after releasing button. When
light is dimmed,The receiver will return to Non-ID Mode.
ID Mode Settings 1-3