User's Manual

CONFIDENTIAL
致伸科技股份有限公司
PRIMAX ELECTRONICS LTD.
BT Mono Headset BLS
Product Name: HTC BH M500
Document ID:
Version #: 0.2
Date: 2011/9/2
7 (10)
User Guide
Primax Electronics Ltd.
7
1 Turn off HTC BH M500.
2. Disconnect HTC BH M500 in the phone menu.
3. Move the headset more than 10 meters away from the phone.
Note that you do not need to delete the pairing with the headset to disconnect it.
When you reconnect a paired headset, you will not be asked for its pin code again.
5. Reconnecting the paired Bluetooth headset to the compatible
phone
To reconnect HTC BH M500 to the last phone used, simply switch on the headset
and it will automatically connect to the phone.
There are occasions when headset is temporarily out of Bluetooth operating range
(up to 10 meters, e.g. user wearing the headset walks away from the phone), the
headset will be disconnected from the phone and user will hear a warning tone from
the headset. Headset is power on now, but no Bluetooth connection mode (Green
light flashes once every 2.5 seconds). If the headset is back in range within 2 minutes,
the HTC BH M500 auto-reconnects with the last phone. If the headset is out of range
for over 2 minutes, long press or double press MFB button to reactivate the
connection.
6. Powering Up
To turn on HTC BH M500
Press and hold the MFB for about 2 seconds. HTC BH M500 beeps and the Green
light starts blinking. (First time use requires pressing it for 5 seconds.)
To turn off HTC BH M500
Press and hold the MFB for about 5 seconds, HTC BH M500 beeps and the Red
light is displayed briefly.
7. Making calls
When HTC BH M500 is connected to the phone, make a call by using the phone in