User's Manual

The unit announces “Name Recording”, “SOS” icon is shown. That means the

phone number is stored for a general phone and emergency's call dial out.

To record voice (example ‘this is John’), hold down

button; speak clearly into

microphone after a beep and "VOICE" icon is flashing. Release the button when

you finish or the unit will stop recording after 3 seconds. The voice prompt will

then be played automatically. [Recording the Voice is necessary for the

personalized talking caller id and talking phone book feature]

7. You can repeat step 2 to 6 to enter more numbers or press PHONE BOOK button to

exit.

Incorrect entries can be deleted by pressing the DEL button. To do this, move the

cursor the correct position using ▲ or ▼ and then press DEL button.

Review Numbers (Phone Book Memory)

1. Press and release PHONE BOOK button,

icon is shown.

2. Review the stored phone numbers by pressing ▲ or ▼, or enter the first letter of the

name of the person you wish to call using the number pad. After a short time, the

display will show the first stored telephone number with this initial letter, and

announce the name if it was recorded, or announce the telephone number. You can

now search for further numbers under this letter by pressing ▼.

*If no voice was recorded for the contact, the phone will only announce the

telephone number only.

Notes:

• If no telephone number is stored, the display will show EMPTY.

• After you view all the Caller ID in memory, the display will show END OF LIST.

• If SOS icon is displayed on the contact, this means that the number is an emergency

primary dial out contact.

If no key is pressed for 30 seconds, the telephone will return to standby Caller ID mode.