User's Manual

THE CALLER ID

At each incoming call with available Caller ID, the telephone will ring and announce the caller with their

name (if a name was recorded associated with a telephone number in the phone book) or with the

voiced telephone number.

Important: When using the Caller ID features, please note it is only available at Caller ID mode

(CLIP icon turns on). If the CLIP icon is off, press

button once.

Please note that all Caller ID features are strictly related to the service provided by the provider

of your telephone services. It is necessary to subscribe to the caller id service supplying service

to your home to have the features of who is calling or telephone 3s on incoming calls. Even if

you don’t have Caller ID service you can enjoy the many features, since if you have an answering

machine, you can hear who is calling and decide to pick up call if you desire

If the telephone is connected to a PABX the caller ID features depend on the PABX.

The Caller ID feature is only possible with the unit powered by the 120V AC power supplied to your unit

through the AC Adaptor enclosed with your unit or by the backup batteries in case of power failure(s) for

a total time of up to 12 hours of power failure time.

Receiving a Call (the telephone can store up to 64 calls)

• If only the caller’s phone number is received, the display shows the caller’s phone number with the

time and date it was received. The NEW icon turns on and NEW CALL LED blinks.

Notes:

1. CALL#01 means this data is stored in Caller ID memory location #01.

2. The calling time and date are immediately recorded from the real-time clock.

• If both the caller’s name and phone number are received, the display shows the caller’s name and

phone number, with the time and date it was received. The “NEW” icon turns on and NEW CALL LED

blinks.

Note: If the caller’s name has more than 16 characters, only the first 16 characters will be displayed.

• If the name and number are not available due to the caller’s restriction, the display shows -PRIVATE

CALL- with the time and date received. The NEW icon turns on and NEW CALL LED blinks.

• If the name and number are not available, the display will show -OUT OF AREA- with the call’s time

and date. The NEW icon turns on and NEW CALL LED blinks.

• If a long distance call message is received, the display will show -LONG DISTANCE- with the calls

time and date. The NEW icon turns on and NEW CALL LED blinks.

• If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -NO NUMBER-.

NOTES:

1. If the Caller ID memory is full, the oldest data will be removed on a first-in/first-out basis.

2. If the Caller ID information received duplicates another call in memory, the time/date will be updated

and the “REPEAT” icon will be lit.

3. If no key is pressed within 60 seconds, the display will display the total call counter, new call counter,

current time and date.