User's Manual

21
To Edit the Phone Book Memory
1. Press and release button, icon is shown.
2. Select the required location from the phone book by pressing or .
3. Press and hold MENU button for two seconds. The display will show EDIT?.
4. Press OK button, the first digit of the selected phone number will be flash.
5. You can move the cursor to the required position by pressing
or . To delete the digit, press
DELETE button, or press any numeric key to replace the digit and confirm with OK button. Then the
display shows the flashing first letter of the name.
6. Move the cursor to the required position by pressing
or . To delete the letter, press DELETE
button, or press any numeric key to replace the name, and confirm with OK button, “EMERGENCY
ON or OFF” is shown.
7. If the display shows “EMERGENCY OFF”, and you want to change it as an emergency’s call dial out,
select “EMERGENCY ON “ by pressing or , and confirm with OK button, now “LOCATION” is
shown. Select the required location by pressing or and confirm with OK button, if the location is
in use, now display shows OVERWRITE?, confirm with OK, “SAVED!” is shown.
´If you select “EMERGENCY OFF” and confirm with OK, “SAVED!” is shown.
8. You can repeat step 2 to 7 to edit more numbers or press to exit.
To Delete the Phone Book Memory
1. Press and release button, icon is shown.
2. Select the required location from the phone book by pressing or .
3. To delete single memory , press DELETE button once. The display will show the DELETE?. Press
DELETE button for 2 seconds. The telephone number and name will be deleted and the display will
now show another number from the phone book.
To delete all entire memory , press and hold DELETE button until the display shows DELETE ALL?.
Press DELETE button for 2 seconds until EMPTY appears on the display.
To Store Numbers hotkey and (User programmable)
The phone is equipped with two emergency hot keys. They can be programmed with the telephone
number of the police or the fire department or any other emergency number for each of these buttons.
These two buttons are not part of the phone book. They are quick dial telephone numbers that simply
dial the telephone number you pressed with just the press of that button.
1. Press and release the MENU button until the STORE NUMBER is shown.
2. Press the OK button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22 digits using the number pad and confirm
with OK button.
4. Press or .
5. Confirm with OK button. The number has now been saved and display show SAVED!.
6. Repeat step 2 to 5 to store other numbers for other memory buttons or press DELETE button to exit.
To dial the numbers in the emergency MEMORY Buttons, simply pick up the handset or press SPEAKER
button and press or .
Note: The numbers stored in these 2 memory buttons are for manual dialing only and will not be dialed
in the emergency feature unless they are also entered in the phone book and when entered are
programmed in as an emergency no. and a specific location.