User's Manual

PHONE BOOK (Emergency Nos.)

IMPORTANT: We suggest you enter up to 5 telephone nos. you would like to have called in an emergency

with just one (1) press of a button.

Note: The phone book allows you to enter, display, record the persons name and specify if this a

telephone no. that is to be called in the units Emergency Help System as well as the sequence in which

the telephone numbers will be called

To use the phone book and enter the telephone numbers to be called and the sequence of calling,

press button until the icon is displayed

Storing up to 5 telephone numbers in the phone book including emergency nos. to be called in

an emergency. (You may enter more or less. The total phone book allows you up to 30 telephone

numbers for convenient/Important and Emergency calling numbers)

Note: It is important that up to 5 or more telephone nos. be reserved for the emergency function. You

may want to duplicate the calling of 1 or more of the entered emergency nos. in the event a called no. is

busy or cannot be reached.

Entering up to 5 telephone numbers names and location (entering location 1 means that is the 1

no. to be called,2 the 2

etc.). Important: Enter telephone #'s, exactly as you would from where installed.

Note: You may have a telephone system where it is beneficial to put a pause (P) before dialing a

particular digit. Pressing the REDIAL button will create a 3.6 second pause (P).This is important if you

are using on a PABX or PBX system where you should put a pause(P) before and after entering 1,8 or

9, or using the Emergency Help System of this unit.

For PBX or PABX users, enter a pause(P) before and after entering a 1, 8 or 9 to get outside dial tone.

1. Press and release the MENU button until STORE NUMBER is shown.

2. Press the OK button. The cursor will flash in the first position.

3. Enter the required telephone number starting with a pause(P). Press REDIAL button to create a

pause(P) followed with a maximum of 21 digits using the number pad and confirm with OK button,

(both the erase feature and pause feature can be used when storing the telephone number)

4. Enter the required name with a maximum of 16 letters. Cursor shown as (I) is all the way on left side

of the LCD display.

See Table 1 for details

5. Confirm with OK button. The display now shows EMERGENCY OFF.

6. Scroll the or button to EMERGENCY ON

7. Press OK button to confirm.

Now “LOCATION” is shown. Select the required location by pressing or and confirm with OK

button, if the location you chose is in use, LCD display will show OVERWRITE?, confirm with OK or

select another location with or . Press the OK button and “SAVED!” is shown.

Note: Any telephone # entered that is to be used for emergency calling should be entered in the order

those phone numbers are to be called.

Selecting the correct location is very important because this feature determines in case of emergency

the sequence of the telephone numbers that will be dialed in the emergency feature. Location 1 will

be dialed first, then 2, then 3 etc.]

Important:: if you choose to overwrite a location, the previously stored number will be erased]

The unit announces “Name Recording for Phone book”, icon on LCD display is shown. That

means the phone number is stored for a general phone as well as a number that can be called in the

Emergency Help System.