User's Manual

11
Setting the Voice ON/OFF
The telephone is factory preset with all voice features ON. (To exit, press Exit button)
Note: The volume of the voice features is regulated thought the slide switch located on the side of
unit
If the user does not wish to hear the voice prompts, this voice feature can be set to OFF. We suggest
that while programming you keep this feature ON.
1. Press and release the MENU button until VOICE is shown.
2. Press the OK button.
3. Using the
or to select between VOICE ON or OFF and confirm with OK button. Unit will say
VOICE ON/OFF
4. Press
(Exit) button to exit this set-up mode.
Note: User can use MENU key (or press or key) to switch between the menu functions.
User can press DELETE button to exit the set-up mode.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch located on the side of the unit to
select high (HI), mid (MID) and low (LO) level.
The red bright LED on front of unit will flash with all incoming calls.
Handset Volume Control/Tone Receiving Adjustment
The HANDSET volume control located under the handset enables user to adjust the amplification of the
call which will also result in a more comfortable listening level. To turn on this amplifier after you pick up
the handset…press button on telephone for 1 second and release, LOUD LED display will now be lit.
Move handset volume control to desired amplification. Move TONE level, located on side of unit to
desired level. Your unit is now set to your desired level as long as the settings are kept. Each time you
hang the handset up, the amplifier will go OFF. Each time you pick up the handset, simply press the
button for 1 second to turn on the amplifier. To turn off amplifier and tone level simply press button for
1 second. LOUD LED will also go OFF.