User's Manual

Setting the TIME and DATE

1. Press and release the MENU button until TIME/DATE is shown.

2. Press the OK button. The display shows ENTER TIME and the hour digit is flashing.

3. Select the current hour using the or and scroll to the present hour and confirm with OK button.

The minutes will now flash in the display.

4. Select the required minutes using the

or and scroll to the present minute

Press the OK button.

The display now shows ENTER DATE and the month digit is flashing. .

5. Select the current month using the

or and scroll to the present month and confirm with OK

button. The day will now flash in the display.

6. Select the current day using the

or and scroll to the present date. Confirm with OK button. Unit

will say STORE NO. TO PHONE BOOK

7. Press

(Exit) button to exit this set-up mode.

Important: If you have subscribed to Caller ID service, please note that some telecom providers, when

sending the Caller ID signal also send the time and date. In this case the telephone will automatically

set its internal clock.

Setting the Tone/Pulse

Important: Your unit is already preset to TONE. If you have a tone dialing phone and tone dialing

service, skip this step by pressing the Exit button.) If you have a rotary dialing system in your home,

follow these instructions.

1. Press and release the MENU button until TONE/PULSE is shown.

2. Press the OK button, the display shows TONE.

3. Select the TONE or PULSE by using the or and confirm with OK button. Unit will say TONE/

PULSE

4. Press (Exit) button to exit this set-up mode.

Setting the Ringer Tone

Note: Your unit is preset to a Ringer tone. (If you do not wish to change press the Exit Button)

To change..follow these steps.

1. Press and release the MENU button until RINGER TONE is shown.

2. Press the OK button, the display shows 1.

3. You can select ringer 1, 2, or 3 by using the or and confirm with OK button. Unit will say

LANGUAGE

4. Press (Exit) button to exit this set-up mode.