Owner's Manual

CD35 Prisma Compact Disc Player User Guide
7
GETTING STARTED
1 Unpack the CD35
Your CD35 is supplied with:
This User Guide
The Chromecast built-in Quick Start Guide
Mains cable
IR cable
Trigger cable
Antennae for Bluetooth and Wi-Fi
C25 remote control with batteries
AC Polarity Pen
If any of these items are missing please contact your
supplier. We recommend you retain the packaging in
case you need to transport the unit at a later date.
Note that the CD35 is supplied with a protective film on
the display glass. Remove the film for a clearer whiter
display.
l
l
l
l
l
l
l
l
2 Connect to an amplifier
Analogue outputs
The analogue output provides for both the recommended
balanced XLR outputs and the conventional unbalanced
RCA outputs for connecting to an appropriate stereo
amplifier or preamplifier.
Connect the appropriate outputs to your amplifier or
preamplifier using a suitable cable.
Digital outputs
Alternatively the CD35 Compact Disc Player provides
one coax digital output and one optical digital output for
connection to a digital preamplifier or digital surround
processor.
Connect the appropriate output to your preamplifier or
surround processor using a suitable cable.
3 Connect the antennae
Connect the two antennae supplied with the CD35 to
the ANT 1 and ANT 2 sockets on the back panel, and
position the two antennae at a slight angle from the
vertical.
One antenna is for Bluetooth connectivity, and the other
one is for Wi-Fi connectivity.
l
l
l
4 Connect a USB flash drive
You can optionally connect a USB flash drive or USB hard
drive to the USB-A input to play audio files from the drive.
For more information see PLAYING MUSIC FROM A
DRIVE OR MUSIC SERVER , page 13.
5 Connect power
Plug one end of the mains cable supplied with the
CD35 into the power connector on the back panel,
and connect the other end to a wall socket.
If this cable is not suitable for your power outlets please
contact your supplier for an alternative cable.
Note: See Phase , page 18, for information about getting
the best sound from your CD35.

WARNING: Always disconnect the CD35 from the
mains power before connecting or disconnecting
any cables.
Switch on the CD35, using the switch on the back panel.
To switch on from standby
Press the O button on the front panel or remote control.
The display shows:
PRIMARE
l
l
l