Owner's Manual

CD35 Prisma Compact Disc Player User Guide16
GENERAL SETTINGS
The GENERAL SETTINGS menu allows you to configure the
general operation of the CD35:
GENERAL SETTINGS
FRONT PANEL UNLOCKED
AUTO-DIM AFTER 10MIN
LED BRIGHTNESS
FRONT PANEL
Choose LOCKED to lock the front panel buttons and
knobs, or UNLOCKED (default) to use them.
To unlock the front panel buttons use the remote control to
select this menu, or remove power from the CD35 for a
few seconds.
AUTO-DIM
Allows you to choose the delay for dimming the display
after no user interaction, between: AFTER 1MIN, AFTER
5MIN, AFTER 10MIN (default), or OFF.
LED BRIGHTNESS
Displays the LED BRIGHTNESS menu to allow you to set the
display brightness to between 1 and 5 for each display
dimming level:
DIM HIGH (default 3), DIM MID (default 2), DIM LOW
(default 1), or DIM OFF (default 1).
STANDBY SETTINGS
Displays the STANDBY SETTINGS menu to allow you to
specify the standby settings.
STANDBY MODE can be set to ECO to reduce the standby
consumption to less than 0.5W, or NORMAL which allows
the CD35 to wake from streaming inputs.
AUTO-STANDBY automatically switches the CD35 to
standby if there is no user interaction or audio from the
current source for a specified delay: AFTER 10MIN, AFTER
15MIN, AFTER 20MIN (default), or OFF.
Note: The AUTO-STANDBY function will be disabled if the
network has not been set up.
FACTORY RESET
Resets the CD35 to the factory default settings.
You are prompted to confirm. Select YES to proceed or
NO
to cancel.
FIRMWARE VERSIONS
Displays the FIRMWARE VERSIONS menu to allow you to
view the versions of firmware installed.
STREAMING SETTINGS
Allows you to configure the CD35 streaming:
STREAMING SETTINGS
METADATA ON
BLUETOOTH SETTINGS
AIRPLAY PASSWORD
METADATA
Allows you to choose ON (default) or OFF to specify
whether metadata, such as the artist name and song title,
should be displayed.
BLUETOOTH SETTINGS
Displays the BLUETOOTH SETTINGS menu.
VISIBLE can be set to ON to make the CD35 visible to
other Bluetooth devices, or OFF (default) to make the
CD35 not visible.
Note: VISIBLE allows any Bluetooth-enabled device within
range to discover and pair with your CD35.
AUTO-CONNECT can be set to ON to automatically
reconnect to a paired mobile Bluetooth device when the
Bluetooth input on the CD35 is selected, or OFF (default)
to disable automatic connection.
AIRPLAY PASSWORD
Allows you to set an optional password for connection by
AirPlay. Leave empty for no password.
NETWORK SETTINGS
Allows you to configure the network connection:
NETWORK SETTINGS
QUICK INFO
QUICK INFO
Shows the NETWORK INFO screen with the following
information:
Connection: one of CONNECTED BY WIFI, CONNECTED
BY CABLE
, or NOT CONNECTED.
NETWORK, the current SSID.
IP, the current IP address.
DEVICE NAME, the device name.
WIFI MAC, the Wi-Fi MAC address.
BT MAC, the current Bluetooth MAC address.
You can also display this information by holding down the
i button on the remote control.
l
l
l
l
l
l