Owner's Manual

DD15 Compact Disc Transport User Guide12
Using the settings menus
You can view and change the DD15 settings from the front
panel, remote control, or using the Prisma app.
To display the settings menu
Press >/] and */å on the front panel simultaneously,
or the MENU button on the remote control.
The settings menu is displayed:
DD15 SETTINGS
PLAYBACK
AUDIO
GENERAL
To step between settings
Press the >/] or */å buttons on the front panel, or
the A or V buttons on the remote control.
The current setting is shown highlighted.
To change a setting
Press and hold the >/] button on the front panel, or
press the SELECT button on the remote control.
The current value is shown highlighted.
Press the >/] or */å buttons on the front panel, or
the A or V buttons on the remote control, to change
the value of the setting.
As you change it the new value is shown in the menu.
Press and hold the >/] button on the front panel, or
press the SELECT button on the remote control, to save
the value you have set.
To navigate back or cancel editing a setting
Press and hold the */å button on the front panel, or
press the button on the remote control.
To exit from the settings menu
Press >/] and */å on the front panel simultaneously,
or press the MENU button on the remote control.
l
l
l
l
l
l
l
PLAYBACK SETTINGS
The PLAYBACK SETTINGS menu allows you to customise
the auto resume feature:
PLAYBACK SETTINGS
AUTO RESUME OFF
AUTO RESUME
Specifies whether disc playback will start from the
previously saved point.
Choose OFF to play from the beginning or ON to play
from the previously saved point.
GENERAL SETTINGS
The GENERAL SETTINGS menu allows you to configure the
general operation of the DD15:
GENERAL SETTINGS
FRONT PANEL UNLOCKED
AUTO-DIM AFTER 10MIN
STANDBY SETTINGS
FRONT PANEL
Choose LOCKED to lock the front panel buttons and
knobs, or UNLOCKED (default) to use them.
To unlock the front panel buttons use the remote control to
select this menu, or remove power from the DD15 for a
few seconds.
AUTO-DIM
Allows you to choose the delay for dimming the display
after no user interaction, between: AFTER 1MIN, AFTER
5MIN
, AFTER 10MIN (default), or OFF.
STANDBY SETTINGS
Displays the STANDBY SETTINGS menu to allow you to
specify the standby settings.
AUTO-STANDBY
automatically switches the DD15 to
standby if there is no user interaction or audio from the
current source for a specified delay: AFTER 10MIN, AFTER
15MIN
, AFTER 20MIN (default), or OFF.
FACTORY RESET
Resets the DD15 to the factory default settings.
You are prompted to confirm. Select YES to proceed or
NO to cancel.
FIRMWARE VERSIONS
Displays the FIRMWARE VERSIONS menu to allow you to
view the versions of firmware installed.
CONFIGURING THE SETTINGS