Owner's Manual

CD15 Prisma Compact Disc Player User Guide 15
Using the settings menus
You can view and change the CD15 settings from the
front panel, remote control, or using the Prisma app.
To display the settings menu
Press >/] and */å on the front panel simultaneously,
or the MENU button on the remote control.
The settings menu is displayed:
CD15 SETTINGS
PLAYBACK
AUDIO
GENERAL
To step between settings
Press the >/] or */å buttons on the front panel, or
the A or V buttons on the remote control.
The current setting is shown highlighted.
To change a setting
Press and hold the >/] button on the front panel, or
press the SELECT button on the remote control.
The current value is shown highlighted.
Press the >/] or */å buttons on the front panel, or
the A or V buttons on the remote control, to change
the value of the setting.
As you change it the new value is shown in the menu.
Press and hold the >/] button on the front panel, or
press the SELECT button on the remote control, to save
the value you have set.
To navigate back or cancel editing a setting
Press and hold the */å button on the front panel, or
press the button on the remote control.
To exit from the settings menu
Press >/] and */å on the front panel simultaneously,
or press the MENU button on the remote control.
l
l
l
l
l
l
l
PLAYBACK SETTINGS
The PLAYBACK SETTINGS menu allows you to customise
the auto resume feature:
PLAYBACK SETTINGS
AUTO RESUME OFF
AUTO RESUME
Specifies whether disc playback will start from the
previously saved point.
Choose OFF to play from the beginning or ON to play
from the previously saved point.
AUDIO SETTINGS
The AUDIO SETTINGS menu allows you to customise the
balance and start-up volume, and the maximum and mute
volume.
AUDIO SETTINGS
OUTPUT VARIABLE
BALANCE 00LR00
STARTUP VOLUME 30
OUTPUT
Specifies whether the output is VARIABLE (default) or
FIXED
.
Selecting FIXED will show a loud-volume warning. Select
YES
to proceed or NO to cancel the fixed gain setting.
If VARIABLE is selected the following additional settings
are available.
BALANCE
Allows you to adjust the balance between 00LR-9 (far left),
00LR00 (centred, default) and -9LR00 (far right).
STARTUP VOLUME
Sets the general startup volume to between 0 and 60. The
default is 30.
MAXIMUM VOLUME
Sets the maximum volume limit between 0 and 99. The
default is 99.
MUTE VOLUME
Sets the volume when unit is muted. You can choose
between 0 (default) and 30.
If the current volume is lower than the specified MUTE
VOLUME
, the volume will be set to 0 when pressing mute.
CONFIGURING THE SETTINGS