User guide

>
Advanced use
8
To repeat a specific section of a disc
• Press the A/B button on the remote control at the start of the section you
want to repeat.
The front panel display shows REPEAT A-:
4 1 1.09
INDEX
REPEAT A-
TRACK
MIN
SEC
4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
>
• Press the A/B button again at the end of the section you want to repeat.
The front panel display shows REPEAT A-B:
4 1 4.20
INDEX
REPEAT A-B
TRACK
MIN
SEC
4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
>
The compact disc player will then automatically return to the start of the section
you have marked and play back repeatedly.
To turn off repeat
• Press the REPEAT button again.
The REPEAT symbol in the front panel display will be cleared.
PROGRAMMING A SELECTION OF TRACKS
The D20 Compact Disc Player allows you to program a selection of tracks on
the current disc. You can then play just the tracks you have selected.
To program a selection of tracks
• Press the MEM button on the remote control while the disc is stopped.
The front panel display shows PROGRAM.
• Use the [ and ] buttons on the remote control to select the first track you
want to program.
As you step between tracks the front panel display shows the number of the
track you are programming, the number of the step in the program, and the
duration of the track.
The track number also flashes in the track list on the right-hand side of the
display:
9 1 5.14
INDEX STEP
PROGRAM
TRACK
MIN
SEC
9
• Press the MEM button on the remote control to program the currently
selected track.
• Repeat for any other tracks you want to program.
• Press the MEM key to exit from programming mode.
§3 Advanced 7/12/00, 12:30 pm8