Data Sheet

ENGINEERING DATA SHEET
Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]
www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.
tRiPADs
TriPad™ mic stand isolators are designed to decouple the stand from oor-
borne noise and resonance. The TriPads are constructed from high-density
acoustic foam that has been modied for added rigidity. The pads are then
cut into a convenient disc shape, drilled at a precise angle, and then cut
two more times to create a design that is unobtrusive when placing stands
around instruments.
The mic stand leg slips into the slot and stays in place making it easy to
move the stand around the studio without having to reposition it each time.
The Primacoustic TriPad mic stand isolators ship as a set of three units in
a handy storage tube.
Features
• Extra stiff, high-density open cell foam construction
• Easy to mount design ts most tripod mic stands
• Innovative slotted design keeps isolation pads in place
• Comes in handy storage case
Benets
• Eliminates footstep resonance through the oor from transferring to mic
• Improves the sound of the recording
• Reduces time required to mast or EQ out problems
• Very cost effective
Cool Stuff
• Quick - easy to use design ts most mic stands
• Sturdy foam with low form factor will not cause mic to sway
APPLICATIONS:
SPECIFICATIONS:
ORDER NUMBER P300-0208-00
MATERIAL High-density acoustic foam
DIMENSIONS 4” (101mm) x 2.25” (57mm)
COLOR Charcoal
Drilled at precise
angle to t tripod
mic-stand leg.
High-density
acoustic foam for
maximum isolation.
Grabs on and
moves with stand.
Extra deep to
reduce vibration.
TriPads isolate cello and violin mics on a
hollow and resonant stage.
TriPads isolate a voice-over mic placed on
hardwood oors.
TriPads isolate drum mics from vibrations
created by the drums themselves.