Installation Guide

ManualsBrandsPrimacoustic ManualsAcoustic TreatmentVariable Pitch Diffuser

W W W . P R I M A C O U S T I C . C O M

(QTY) Description:

(1) Top section

24” x 8” Black

(608mm x 200mm)

(1) Bottom section

24” x 8” Black

(608mm x 200mm)

(2) Side sections

46.75” x 8” Black

(1187mm x 200mm)

(1) Center divider

46.75” x 5” Black

(1187mm x 130mm)

(6) De ectors

46.75” x 3.5” Black

(1187mm x 88mm)

(1) Beveled upper

cross support

(1) Lower cross support

(1) Wall cleat

(1) Fabric wrapped

 berglass panel

(QTY) Description:

(18) Metal pins

(20) Wooden dowels

(10) Large  ush-mount

Phillips screws

(2) Heavy duty Phillips

screws

(2) Plastic drywall

anchors

TOOLS REQUIRED:

• Medium sized Phillips

screwdriver

• Bubble level

• Wall stud  nder

(recommended)

• Cordless drill and 1/8”

(3.5mm) drill bit

HARDWARE BAG BOX CONTENTS

OWNER’S MANUAL

Congratulations on purchasing the Primacoustic FlexiFuser™. The FlexiFuser is a 24” x 48”

x 8” high frequency diffuser that is placed behind the listener while spanning the width of the

listening area to scatter primary re ections, standing waves and  utter echo. A series of variable

pitch de ectors may be rotated to a desired position to dissipate sound energy and retain a

sense of air and ambiance in the room. Behind the slats, a 2” thick Broadway  berglass panel

eliminates internal re ections while augmenting mid and high frequency attenuation. Ideal for

studio and home theatre applications. Black frame with grey fabric panel.

Please take a few minutes to read this installation manual. It will give you step by step assembly

and mounting instructions. Please refer to www.primacoustic.com for various placement options

and bene ts. Should you have any questions or comments, we invite you to send an email to:

info@primacoustic.com.

Before beginning assembly, please take a moment to familiarize yourself with the box contents.

It will include:

FLEXIFUSER

™

Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way, Port Coquitlam, BC Canada V3C 5M5

Summary of content (3 pages)

PAGE 1
W W W FLEXIFUSER ™ OWNER’S MANUAL . Congratulations on purchasing the Primacoustic FlexiFuser™. The FlexiFuser is a 24” x 48” x 8” high frequency diffuser that is placed behind the listener while spanning the width of the listening area to scatter primary reflections, standing waves and flutter echo. A series of variable pitch deflectors may be rotated to a desired position to dissipate sound energy and retain a sense of air and ambiance in the room.
PAGE 2
ASSEMBLY INSTRUCTIONS 1 Insert four wooden dowels into the bottom section 2 Guide the other side section onto the dowels and secure with two large flush-mount Phillips screws from below. 4 Insert two wooden dowels into the bottom section for the center divider. Guide the side section onto the dowels and secure with two large flush-mount Phillips screws from below. Insert four dowels into the ends of the upper beveled rear cross support and attach to the side section.
PAGE 3
ASSEMBLY INSTRUCTIONS 5 Insert six metal pins into the bottom section. 6 Guide the six vertical deflectors onto the pins. Insert four wooden dowels into the side sections and center divider. Insert a metal pin into the middle hole of each vertical deflector. If the vertical deflectors are to be fixed in place insert a second metal pin in the rear hole of each deflector. Skip this step if the deflectors are to be movable and continue to step-8.