Technical Specifications

Bottom Bracket View Front Bracket View
Side Hydrant View
47.00"
Replacement Parts
Rough-In Dimensions
4515 East 139th Street
Grandview, MO 64030
[phone]
Fax [phone]
www.PRIER.com
Furnish and install Model P-RH2 commercial Post Mount Roof Hydrant manufactured by PRIER Products, Inc. Hydrant shall be installed through a
1 ¾” single penetration in the roof and mounted to the interior structure with the Universal Roof Hydrant Mounting Bracket (P-RMB) provided. This
bracket must be manufactured of heavy gauge powder coated steel and must allow for adjustment to meet roof angles up to 4/12. The mounting
bracketshallbemountedtoconcrete,aroongtruss,steelI-beamorinteriorwallwithstandardconstructionmaterials(all-thread,Unistrutor
other).Thehydrantshallhaveautomaticdrainingcapabilitieswithintegralvacuumbreaker/backowpreventer.Hydrantshallbecastironwith
freezelesswaterowandselfdrainingfunctions,onepiecevalveplungerandatriple-sealshutoffmechanism.Thehydrantshallhavea3/4”
inlet and a 1/8” NPT drainage port to be connected to the drain waste line inside the structure. Hydrant shall be approved under the ASSE 1052
standard.Theroofpenetrationistobesealedbytheroongcontractorinaccordancewiththeroongcodesandconditionsintheirmunicipality.
Specs
2
1
810 9
65
4
7
3
11
12
13
14
28
15
16
17
18
19
20
21
22
23
24
25
26
27
27
29
ID Part No. Description ID Part No. Description
1 314-0021 Mounting Bracket 16 314-0008 Handle Bolt (Stainless Steel)
2 314-0022 Pipe Bracket 17 314-0009 Nylon Hex Nut (Stainless Steel)
3 314-0023 Stand Off 18 314-7001 Adjustable Connector Nut (Zinc)
4 314-0025 3/8" Lock Washer 19 314-7002 Upper Rod (Stainless Steel)
5 324-1006 3/8" Flat Washer 20 310-7005 Valve Stem Cap (Brass)
6 314-0024 3/8" Shoulder Bolt 21 336-0008 Packing (EPDM)
7 314-0027 3/8" Nut 22 324-1003 Washer (Stainless Steel)
8 314-0029 1/2" Flat Washer 23 310-7003 Seal Adapter (Brass)
9 314-0028 1/2" Bolt 24 336-0001 O-Ring (EPDM)
10 314-0030 1/2" Hex Nut 25 310-7001 Seal Sleeve (Brass)
11 301-7003 Handle (Cast Iron) 26 399-7001 Stopper (EPDM over Brass)
12 301-7001 Hydrant Head (Cast Iron) 27 324-0004 Spring Pin, Quantity 2 Required (Stainless Steel)
13 300-7001 Seat (Cast Brass) 28 310-7006 Hose Piece, 3/4" Hose Thread (Brass)
14 315-0001 Thumb Screw (Zinc Plated Steel) 29 399-0001 Check Valve (Plastic, Rubber, Stainless Steel)
15 304-7001 Draw Straps, Quantity 2 Required (Zinc Plated Steel) P-260KT-802 Stopper Repair Kit, Contains: 24, 26, 27