Technical Specifications

ID Part No. Description ID Part No. Description
1 337-6001 Check Spider-Vacuum Breaker 7 C-634KT-802 Stopper Kit, Includes Stopper and Pin
2 346-6001 Diaphragm-Vacuum Breaker 8 C-633KT-809 Worm Sleeve with O-Ring
3 300-6004 3/4” Hose Piece (NP Brass) 9 C-634KT-809 Worm Drive Assembly with O-Ring
310-6009 1” Hose Piece (NP Brass) 10 300-6003 Valve Stem Cap (NP Brass)
4 399-0001 Secondary Check 11 C-108KT-808 Loose Key on Lanyard
5 C-634KT-806 Vacuum Breaker Assembly C-633KT-807 C-633 Overhaul Kit, Contains: 5, 6, 7, 11
6 231-06CC Stem Assembly
Replacement Parts & Stems
Rough-In Dimensions
4515 East 139th Street
Grandview, MO 64030
[phone]
Fax [phone]
www.PRIER.com
Specs
Furnish and install (choose C-633NSV Model or C-633NCC Model) commercial key operated wall hydrant manufactured by PRIER Products,
Inc. Hydrant shall be surface mounted and shall have automatic draining capabilities with integral vacuum breaker/backow preventer. Hydrant
shall be capable of owing a minimum of 15 gallons per minute at 25 PSI pressure change. Hydrant shaft shall be brass with threaded and
sealed connections. Hydrant shall have (choose ¾” or 1”) hose connection with self draining functions, one piece valve plunger, satin nickel
nish, brass operating rod with positive triple-seal shutoff mechanism. Hydrant shall be approved under ASSE 1019-B or ASSE 1052 (choose
option) standards. Operating key with lanyard to be furnished with each hydrant. Hydrant insertion to be specied as C-633NCC (straight with
¾”FPT x 1” MPT connections), C-633PCC (straight with ¾” x 1” sweat connections), C-633VCC (straight with 3/4” press-ready connection) or
C-633NSV (360° swivel with ¾” FPT x 1” MPT connections).
Optional: Furnish and install hydrant box for each hydrant. Hydrant box shall be manufactured in solid cast brass with a (choose from natural
brass or satin-nickel plated brass) nish. Access to the hydrant box shall be provided by (choose hydrant’s key or cylinder lock and key).
.875”
NOTE: HYDRANT
FACE DIMENSIONS =
4.75” X 2.50”
3”
1.75”
HYDRANT INSERTION
DEPTH
2.625”
C-633NCC (Straight)C-633NSV (360° Swivel)
1.75”
HYDRANT INSERTION
DEPTH
2.625”
.875”
NOTE: HYDRANT
FACE DIMENSIONS =
4.75” X 2.50”
6
10
5
2 31 4
7 8 9 11
*When assembling the vacuum breaker,
ensure the dome is facing out on the
check spider and the step is facing out
on the silicone washer.