Service manual

0
GB
Select the location considering the follo�ing:
O U T D O O R U N I T
1 .The location must allo� easy servicing and provide good air circulation
as sho�n in fig2. 2.The unit may be suspended from a �all by a
bracked(Optional)or located in a free standing position on the floor(preferably
slightly elevated).
3.If the unit is suspended , ensure that the bracket is firmly connected and the
�all is strong enough to �ithstand vibrations.
4.Unit location should not disturb neighbours �ith noise or
exhaust air stream. 5.Place the mounting pads under the
unit legs.
6.Refer to figure 2 for allo�ed installation distances.
 LoCAtIonoFoUtDooRUnIt