Owner`s manual

32
www.pridemobility.com Cyclone/RevB/Apr03
ARMREST WIDTH ADJUSTMENT
The Sport Scooter armrest width can be adjusted in-
ward or outward.
1. Loosen the armrest adjustment knobs at the back
of the seat frame. See figure 16.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
The armrests can also be lifted upward to aid in mount-
ing and dismounting your Sport Scooter.
ARMREST HEIGHT ADJUSTMENT
Refer to figure 16 when adjusting the armrest height.
VIII. COMFORT ADJUSTMENTS
HEIGHT ADJUSTMENT
TUBE
ACORN NUT
SETSCREW
Figure 16. Armrest Height
Adjustment
ARMREST ADJUSTMENT
KNOB
You will need the following tools to adjust the armrest height:
 5/32-in. hex key 1/8-in. hex key  7/16-in. wrench
1. Loosen the setscrew on the side of the height adjustment tube with the 1/8-in. hex key. See figure 16.
2. Loosen and remove the acorn nut and screw holding the height adjustment tube in place.
3. Raise or lower the height adjustment tube to the desired height.
4. Align the holes in the height adjustment tube with the holes in the armrest upright.
5. Insert the screw through the holes in both the height adjustment tube and the armrest upright.
6. Install and tighten the acorn nut.
7. Tighten the setscrew on the side of the height adjustment tube.
8. Repeat for the other armrest.
ARMREST UPRIGHT