Owner`s manual

28 Sonic
DISASSEMBLY
No tools are required to disassemble or assemble your Sonic. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work. Keep in mind that the disassembled sections of a Sonic
take up more floor space than the assembled Sonic.
VIII. DISASSEMBLY AND ASSEMBLY
You can disassemble the Sonic into four pieces: the seat, weigh-
ing 9.5 kg (21 lbs.), the front section, weighing 16 kg (35
lbs.), the rear section weighing 16 kg (35 lbs.), and the bat-
tery pack weighing 8 kg (18 lbs.). See figure 15.
Before disassembling the scooter, remove the key and place the manual freewheel lever in the drive (forward) position.
1. Lock the front wheel by pushing the tiller lock knob in and turning it clockwise 90 degrees. See figure 16.
2. Remove seat by pulling it straight upward.
3. Remove the battery compartment lid and place it out of the way.
4. Unplug the motor harness and both battery harnesses. See figure 17.
LOCKED
POSITION
FIGURE 16.
TILLER LOCK
(LOCKED)
FIGURE 17. WIRING
HARNESSES
BATTERY
HARNESSES
MOTOR
HARNESS
FIGURE 15. DISASSEMBLED SCOOTER
BATTERY PACK
REAR SECTION
SEAT
FRONT SECTION
WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for
assistance when necessary before disassembling your scooter.
FIGURE 16A. TILLER LOCK
(UNLOCKED)
UNLOCKED
POSITION
WARNING! Before getting onto your scooter always check that the tiller lock is in the unlocked
position. Attempting to ride your scooter with the tiller lock in the locked position can result in
personal injury.