Owner`s manual

26 Sonic
VII. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
FIGURE 13. SEAT ADJUSTMENTS
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the scooter is in motion.
Your scooter is equipped with an adjustable pivoting tiller.
1. Turn the tiller adjustment knob anticlockwise to loosen the
tiller. See figure 12.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to secure the tiller
in position.
NOTE: In order to lower the tiller to the scooter deck, you
must first remove the seat. See VIII. Disassembly and
Assembly.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Pull up on the seat lock lever to unlock the seat. See
figure 13.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place.
ARMREST WIDTH ADJUSTMENT
The scooter armrest width can be adjusted inward or outward.
See figure 13.
1. Loosen the armrest adjustment knobs at the back of the seat
frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
The armrests can also be lifted upward to aid in mounting and
dismounting your scooter.
FRONT-TO-BACK SEAT ADJUSTMENT
FIGURE 12. TILLER ADJUSTMENT
TILLER ADJUSTMENT
KNOB
ARMREST ADJUSTMENT KNOBS
SEAT LOCK LEVER
You can reposition the scooters seat forward or rearward to one of three settings, thereby adjusting the distance
between the seat and the tiller. See figure 13.
1. Remove the seat from your scooter. Refer to VIII. Disassembly and Assembly.
2. Remove the four bolts that fasten the seat to the seat platform.
3. Align the seat platform with the desired set of holes on the seat.
4. Replace and tighten the four bolts securely.
BOLTS
ARMREST