Owner`s manual

31Legend
SEATBACK ADJUSTMENT
The seatback may be positioned to 4 different angles: 90°, 100°, 102° and 105°. See figure 16A.
VIII. COMFORT ADJUSTMENTS
POWER SEAT ACTUATOR (OPTIONAL)
Your Legend may be equipped with a power seat actuator, which
raises and lowers the seat automatically. See figure 17.
FIGURE 17. POWER SEAT ACTUATOR
(OPTIONAL)
SEAT ACTUATOR
WARNING! The power seat mechanism is
intended for operation only while the vehicle
is stationary and on a level surface. Its
purpose is to aid you in reaching objects.
Strict adherence to the following safety rules
is vital to your safety: Do not attempt to raise
or lower the seat while in motion! Do not
operate your scooter with the power seat
elevated. It is recommended that the vehicle
be driven only with the seat in the lowest
position.
90° ADJUSTMENT HOLE
100° ADJUSTMENT HOLE
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
FIGURE 16A. SEATBACK HINGE
ADJUSTMENT SCREW
UPPER HINGE
LOWER HINGE
To adjust the seat back angle:
1. Loosen and remove the adjustment screw
from the seatback hinge on both sides of the
seat.
2. Reposition the seatback to the desired angle.
3. Align the adjustment holes from the upper
and lower hinge, so the adjustment screw
can easily pass through.
4. Reinsert both adjustment screws and tighten.