Cantilever Lift System ACN# 088 609 661
PRODUCT SAFETY SYMBOLS The symbols below are used throughout this owner's manual and on the product to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/situation that can cause either personal injury, component damage, or malfunction (black symbol on yellow triangle with black border). MANDATORY! These actions should be performed as specified.
TABLE OF CONTENTS SAFETY ......................................................................................... 4 CANTILEVER LIFT SYSTEM ....................................................... 6 VIBE WITH CANTILEVER LIFT SYSTEM SPECS ....................... 8 CANTILEVER LIFT OPERATION - VSI......................................... 9 CANTILEVER LIFT OPERATION - REMOTE PLUS .................. 10 CANTILEVER LIFT OPERATION - EUROPA ............................. 11 SEAT DUMP ADJUSTMENT .......................
Basic Operation Instructions SAFETY WELCOME to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). The product you have purchased combines state of the art components with safety, comfort and styling in mind. We are confident that the design features will provide you with the conveniences you expect during your daily activities. Understanding how to safely operate and care for this product should bring you years of trouble free operations and service.
Basic Operation Instructions 5 INFORMATION EXCHANGE We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about the safety and reliability of your new lift system, and about the service you received from your Quantum Rehab Specialist. Please notify us of any change of address, so we can keep you apprised of important information about safety, new products, and new options that can increase your ability to use and enjoy your Pride product.
Basic Operation Instructions CANTILEVER LIFT SYSTEM The Cantilever Lift System is designed specifically for the Vibe power base. The Cantilever Lift System consists of a lift frame that is integrated into the Vibe power base, an actuator, and an actuator lighting module (ALM). See figure 1. The ALM enables the controller to divert power from the batteries to the actuator. The actuator provides the lift. The total lift is 12 inches. Lift speed is 1/2 inch per second.
Basic Operation Instructions 7 NOTE: Raising the cantilever lift can change your center of gravity. The cantilever lift option is intended for use on a flat, hard, level surface only. See figure 2. NOTE: Check to be sure the speed inhibit system is operating properly before using your power chair. Figure 2. Use Lift on Flat, Hard, Level Surface Only NOTE: Limit your movement while the lift is in an elevated position.
Basic Operation Instructions VIBE WITH CANTILEVER LIFT SYSTEM SPECIFICATIONS Suspension: Drive Wheels: Caster Wheels: Full suspension - Sport Trac 14 in., pneumatic, rear-mounted (14 in., solid are optional) 9 in. pneumatic, front-mounted (9 in. solid, 8 in. solid, and 6 in. solid are optional) Anti-tip Wheels: 4 in., solid, rear-mounted Maximum Speed:* Up to 6 mph Brakes: Intelligent Braking electronic regenerative, disc park brake Ground Clearance: 3.75 in. Turning Radius: 24 in.
Basic Operation Instructions 9 CANTILEVER LIFT OPERATION - VSI To operate the cantilever lift: 1. Bring your power chair to a complete stop. 2. Press an actuator key until the actuator light is on. See figure 3. 3. Push the joystick forward to raise the lift. Pull the joystick back to lower the lift. Once the lift reaches its highest extension and the lift action stops, you should continue to hear and/or feel the lift motor running.
Basic Operation Instructions CANTILEVER LIFT OPERATION - REMOTE PLUS To operate the cantilever lift: 1. Bring your power chair to a complete stop. 2. Press the mode key until the actuator indicator lights up. See figure 4. 3. Push the joystick forward to raise the lift. Pull the joystick back to lower the lift. Once the lift reaches its highest extension and the lift action stops, you should continue to hear and/or feel the lift motor running.
Basic Operation Instructions 11 CANTILEVER LIFT OPERATION - EUROPA To operate the cantilever lift: 1. Bring your power chair to a complete stop. 2. Press an actuator select key until an A appears in the drive mode and actuator display. See figure 5. 3. Pull the joystick back to raise the lift. Push the joystick forward to lower the lift. Once the lift reaches its highest extension and the lift action stops, you should continue to hear and/or feel the lift motor running.
Basic Operation Instructions SEAT DUMP ADJUSTMENT The cantilever seat dump is preset at 5°. The seat adjustment range is 0 - 10°. See figure 6. WARNING! Do not service this product be serviced while it is occupied. Failure to heed can result in personal injury and/or property damage. NOTE: Changing the seat dump is a complicated task and should be performed by a Quantum Rehab Specialist only. To adjust the seat dump: 1. Turn the fasteners on the front cover one quarter (1/4) turn in any direction.
Basic Operation Instructions 13 FRONT COVER LOCKNUT TURNBUCKLE LOCKNUT LOCKNUT TURNBUCKLE LOCKNUT Figure 7. Seat Dump Adjustment Cantilever Lift System www.quantumrehab.
Basic Operation Instructions SEAT POSITION ADJUSTMENT Seat position is preset at Pride during assembly. If for any reason, the seat was removed from the cantilever lift frame, it must be reinstalled exactly as illustrated below. See figures 8, 9, and 10. For removal and installation instructions, refer to the Vibe Owners Manual or the Basic Operation Instructions that accompanied the seat. USE ONLY THE FIRST OR SECOND HOLES USE FIRST HOLE ONLY Figure 8. Contoured Seat (UMS) Figure 9.
Basic Operation Instructions 15 18-MONTH LIMITED WARRANTY For eighteen (18) months from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in material and/or workmanship: n Actuator n Lift Mechanism Warranty service can be performed by your authorized Pride Provider. Do not return faulty parts to Pride without prior consent.
Quality Control - Cantilever Lift System We have thoroughly inspected your Cantilever Lift System. The following checkmarks indicate that it has been tested and inspected. Model #______________ Serial #______________ Fit and Finish Inclusion of all Parts Performance Pride keeps a more detailed report on file at the factory.
