Owner`s manual

Quantum Dynamo ATS/RevA/Apr04 www.quantumrehab.com 25
V. COMFORT ADJUSTMENTS
1
2
A
C
D
B
1
2
B
C
D
A
SETSCREW
MULTI-AXIS FOOT PLATE
The multi-axis foot plate assembly can be installed on either
a swing-away leg rest or an elevating leg rest. The mult-axis
foot plate has four adjustments: leg rest length (A), position
(B), tilt (C), and angle (D). See figure 23.
To change leg rest length (A):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate position (B):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate tilt (C):
1. Loosen the hardware.
2. Tilt the foot plate to the desired position.
3. Tighten the hardware.
To change foot plate angle (D):
1. Turn setscrew clockwise to decrease angle.
2. Turn setscrew anticlockwise to increase the angle.
Figure 23. Multi-axis Foot Plate