Owner manual

18 SUPER NODE™ USER MANUAL
Settings
The Settings screen configures universal settings for the node.
Node Thumbwheel Address (Vx76 Mode)
+ Press address to set the node thumbwheel address using
the numeric keypad.
+ Note: Press the number field to clear the value.
Universe Display
+ Sets display format for DMX universes as either Numeric
or Alphabetical. (This is a device-wide setting.)
Backlight
+ Sets the display's backlight behavior.
- On: The display backlight is always on.
- Auto: The display backlight turns off after a period of
inactivity. The first tap on the screen will wake up the
display but not activate a button.
Status
The Status screen displays various information about the node
for troubleshooting purposes.
+ Version: Displays the currently loaded Super Node
software version number and build date.
+ Network: Displays whether a valid network link is
established (e.g. active, inactive). Press this button to
open the Network screen. (Refer to "Network" on
page 19.)
+ Tem pe ra t u r e : For future use.
+ Load: For future use.
+ Memory: For future use.
Keypad Numeric: