Owner manual

SUPER NODE™ USER MANUAL 11
INSTALLATION
System Options
Vx76
In the Vx76 configuration, one or two Vx76 control consoles may be connected to one or more Super Nodes.
Guidelines:
+ When connecting two Vx76 consoles and multiple Super Nodes, a 100Mb Ethernet switch or hub must be used.
Standard CAT5e Ethernet cables should be used in this configuration. Refer to the illustration below.
+ The Vx76 Mode of operation is used in this configuration. Refer to "Vx76 Mode" on page 16.
Figure 3: Vx76 Configuration Example
V676 CONSOLE "B"
PRG 7-PORT (COPPER) ETHERNET SWITCH
PRG 10-PORT (FIBER) ETHERNET SWITCH
* PRG Belden Ethernet cable or equivalent.
or
V676 CONSOLE "A"
CAT5e Ethernet Cables
Vx76 Protocol CAT5e *
Vx76 Protocol CAT5e *
100 Meter
Maximum
8x XLR DMX512 Data Cable
SUPER NODE
(to S400 Rack)
Art-Net DMX
8x XLR DMX512 Data Cable
SUPER NODE
(to S400 Rack)
Art-Net DMX
CAT5e Ethernet Cables