User manual

42 PRG SERIES 400
®
POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL
Source-Assignable Art-Net Input
An Ethernet input on a Front of House (FOH) module can be mapped to a particular system source. Standard Art-Net
corresponds to System A, so it doesn't need to be re-mapped. A standard Art-Net output can be mapped to a
different system (B, C, or *) by enabling that option on the FOH module. When Ethernet remapping is enabled on a
module, the corresponding DMX inputs are disabled due to the increased processing requirements for handling the
network packets.
For example, access the I/O SUMMARY menu. Select "in" to open CONFIGURE INPUTS menu. At the first DMX
input, change Ja to ETHa by scrolling with arrows and then pressing "done." Once the input is set to ETHa
(Ethernet), the second DMX input becomes disabled (noted by -x-
) .
10
11
RESET
PORT 1 PORT 2
ETHERNET
Z-N
X-N
Y-N
DMX TRUNK
DATA
LINK
Rx
Tx
Z-X
Y-Z
X-Y
FRONT of HOUSE MODULE
MODEL 20-9680-8615
6
AC LINE VOLTS
208V/15A
ZØ-N XØ-YØ YØ-ZØ
OR BRANCH CIRCUIT USE ONLY
3 4 5
DMX INPUTS
ZØ-XØ
3
7
DMX Rx
RDM Rx
RDM Tx
RDM Tx
8
4
RESET
1
RDM Rx
DMX Rx
DMX Rx
RDM Tx
RDM Rx
2
DMX
9
5
Front of House Breakout Module
Ethernet Ports (1 & 2) -
Source-assignable Art-Net
input ports.
DMX Input Port (2) - DMX512 input ports. Mutually exclusive
with the Ethernet ports. If an Ethernet port is assigned to a
source, this pair of DMX connectors are disabled.
DMX inputs
(E will be highlighted)
New Ethernet
The second DMX
input configuration
input becomes disabled.