User manual

PRG SERIES 400
®
400 AMP DISCONNECT USER MANUAL 1
INTRODUCTION
About This Guide
This guide provides necessary information regarding product safety, installation, and operation for the following PRG
equipment:
+ PRG Series 400® 400 Amp Disconnect (20.9680.0200)
Familiarizing yourself with this information will help you get the most out of your PRG product.
WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to
the product and potential injury to yourself or others.
The PRG Series 400® 400 Amp Disconnect is suitable for use in the U.S. and Canada, or any locality with a 5-wire,
120/208V power grid. It is intended for dry locations only and must be protected from moisture if used outdoors.
Additional Documentation
For more information on the Series 400 system, refer to the following PRG manuals:
+ PRG Series 400® Power and Data Distribution System User Manual (02.9680.0001.xx)
+ PRG Series 400® Power and Data Distribution System Service Manual (02.9680.0010)
IMPORTANT INFORMATION REGARDING INSTALLATION. PLEASE READ!
This equipment is intended for installation in accordance with the National Electrical Code® and
local or Federal code specifications. To ensure full compliance with all codes and regulations,
check with your local electrical inspector prior to installation. To prevent electrical shock, turn off
power at mains before installation.