Designer Manual 3.9 User guide

MBOX
®
MEDIA SERVER USER MANUAL 185
* Special commands require that the value be held for 3 sec-
onds, followed by an immediate change to 0 (without any
other values in between).
** Special command that requires the value to be held for
250mS, followed by an immediate change to 0 (with no val-
ues in between)
* A Keystone Mode value of 0 enables the advanced projec-
tion mapping toolset that is accessed through the Mbox
Remote application. When the value is set to 0, if the
advanced projection mapping tools are being used, those
settings will override the standard corner controls.
** Steep = Eighth Order, Medium = Fourth Order,
Shallow = Second Order
203
Switch to Alignment Rectangle file (file selected
by index value set on Master Control Selector
parameter) **
220 Cancel keyboard HUD
230 File Sharing On
231 File Sharing Off
232 ARD On
233 ARD Off
234 Become Backup (turn on Backup mode pref)
235 Become Primary (turn off Backup mode pref)
240 Rescan Media Library *
244 Enable Pixel Mapping Output *
245 Disable Pixel Mapping Output *
246 Enable Masked Pixel Mapping fixtures *
247 Disable Masked Pixel Mapping fixtures *
250 Quit Application *
251 Shutdown Computer *
252 Restart Computer *
253 Restart Application *
Alignment Rectangles
Values Mode
120 All Rectangles, no circle or X
121-129
Group 1-9, no circle or X, # corresponds to
group
130 All Rectangles, with circle or X
131-139
Group 1-9, with circle or X, # corresponds to
group
Keystone
Chan Size Function Default Snap
11Keystone Mode 255 Y
2 2 Keystone X 32767 N
4 2 Keystone Y 32767 N
61 Tile Mode 0Y
7 1 Tile Overlap 0 N
8 2 Scale 65535 N
10 1 Edge 1 0 N
11 1 Edge 2 0 N
12 1 Edge 3 0 N
Master Control Channel (Continued)
Values Play Mode
13 1 Edge 4 0 N
14 1 Corner 1 - X 0 N
15 1 Corner 1- Y 0 N
16 1 Corner 2 - X 0 N
17 1 Corner 2 - Y 0 N
18 1 Corner 3 - X 0 N
19 1 Corner 3 - Y 0 N
20 1 Corner 4 - X 0 N
21 1 Corner 4 - Y 0 N
22 1 Keystone Rotation 127 N
Keystone Mode
Value Mode
Blend
Curve
Grid
Overlay
Controls
0
Use
Mbox
Remote*
n/a no
Keystone/
Warp is set
from Remote *
1-8
Corners
Steep ** no
X/Y Corner
9 Steep yes
10-18 Medium no
19 Medium yes
20-28 Shallow no
29 Shallow yes
30
Rotation
& Aspect
Steep no
X/Y
Rotation &
Aspect
31 Medium no
32 Shallow no
39 Steep yes
40
Rotation,
Aspect,
& Curve
Steep no
X/Y Rotation,
aspect, &
X/Y Curve
41 Medium no
42 Shallow no
49 Steep yes
Keystone (Continued)
Chan Size Function Default Snap