Assembly Instructions

ManualsBrandsPrevue Hendryx ManualsAll Bird Cages24'' Plastic Dome Top Hanging Bird Cage with Perch

KEY:

DT = Dome Top

C = Cage

B = Base

G = Grille

T = Tray sections

cage assembly instructions

Small Round Bird Cage

Model: # 31999

cage: 16"diam. (with cups) × 23¾"H (to top of finial)

interior: 12½"diam. × 19½"H

wire gauge: 11 & 13

wire spacing: ¼"

getting started!

READ THESE NOTES FIRST:

• Review All Parts: If parts have been damaged, please contact

Prevue Customer Service.

• Tools: No tools are necessary for the assembly of this cage.

Review these instructions thoroughly before attempting to assemble

cage. If you still require assistance, please contact Prevue Customer

Service at 800.243.3624 or customerservice

prevuepet.com

parts

Insert the perch.

Insert the food/water perch cups:

→ Caution: Spring-hinged doors hold the perch cups

in place. Be careful not let the door snap onto fingers

or cups when opening or closing.

With a firm grip, open the spring-hinged door

with one hand, and place the perch cup into place

with the other. Hook the perch arm of the cup

over the horizontal cage wire. Close the spring-

hinged door gently — do not let the door snap

shut onto the perch cup.

The clear plastic food/water perch cups disassemble

into two pieces for easy cleaning.

6 Attach the dome top:

→ There are 6 looped wire tabs

around the top rim of the

cage (C) body (two near the

cage body seam, and four

others, spread equidistant

around the rim).

To secure the dome top

(DT) to the cage body,

catch the rim wire of the

dome top under the loop

tabs in all six areas.

✩

Your cage is now

fully assembled!

GRILLE

2-PIECE

TRAY

{ 1 } wood perch swing

{ 2 } 2-piece perch cups

{ 1 } wood perch

{ 3 } clamps

Made in China for Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 customerservice@prevuepet.com 31999—10/11

Summary of content (2 pages)

PAGE 1
Insert the perch. cage assembly instructions Insert the food/water perch cups: → Caution: Spring-hinged doors hold the perch cups in place. Be careful not let the door snap onto fingers or cups when opening or closing. With a firm grip, open the spring-hinged door with one hand, and place the perch cup into place with the other. Hook the perch arm of the cup over the horizontal cage wire. Close the springhinged door gently — do not let the door snap shut onto the perch cup.
PAGE 2
steps 1 B 1 Assemble the dome top unit: 3 Slide the small plastic dome cap (2) onto the shaft of the hanger finial (1). 2 → The threaded disk (3) has a raised ridge on the top surface that sets into the hole of the dome top (DT). The underside of the disk has three raised ridges in the center for gripping/turning. From the underside, set the threaded disk (3) into place in the dome top (DT) opening.