Manualshelf

Use Instructions

ManualsBrandsPrevent Biometrics ManualsElectronicsIMM 1.3
11121314151617181920
IMPACT MONITOR – CHARGING
Charging Case
If the blue IMM tooth-molding material is sticking out past the end of the IMM and is interfering with
the ability to push the IMM all the way back in the alignment slot, it can be trimmed with scissors.
Caution: Only trim the blue IMM tooth-molding material. Do not trim the clear or gray material.
Place the IMM in the charging case and securely close the lid. Ensure the IMM is pushed all the way
down in the charging case, as shown in the photo.
CHARGING VIA USB CABLE
Plug the charging case into a USB micro cable plugged into a USB power source.
The IMM should emerge from sleep mode within about 15 minutes of charging and should be fully
charged in 70 minutes.