User manual

UltimateGuard
TM
Quick Guide
- 23 -
Notice!
DO NOT CONTINUE WORK ON A HARDDRIVE CONTAINING LOST DATA.
 You should not use the system with the deleted files to surf the Internet,
check mail or create documents.
 Do NOT reboot or shut down the system.
 Never install software to a system containing deleted files you wish to
recover.
 The more activity the less of a chance of recovery.
 DO NOT defragment your hard drive or execute SCANDISK in a deleted
recovery situation. Doing so will likely remove all remnants of the file you
are trying to recover.
FILERECOVERY was designed to run from the CD-ROM or from a directory
on another partition or network drive. It is not recommended that you install the
software on the work system; temporary files may be written to the disk. Simply
run the software from the AutoRun menu (right click your CD-ROM symbol) or
Click the RECOVERY.EXE file in Windows explorer. Once the desired files are
recovered you can install FILERECOVERY on the system.
NOTE: For using FILERECOVERY under Windows 2000/XP/VISTA/Win7 your
user account must have administrator privilege.
The user interface
Below the program title there is the menu bar (1). Further below there is the
button toolbar (2) from which the most important points of the program can be
accessed. The directory tree (3) and the file list view (4) are used to navigate
through your drive.