MSDS

ManualsBrandsPrestone ManualsTools & Hardware32 oz. DOT 3 Hi-Temp Brake Fluid

MSDS042

HI-TEMP BRAKE FLUID DOT 3

Date Prepared: 04/25/2012

Page 1 of 7

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification

MSDS ID: MSDS042

PRODUCT NAME: Prestone® Hi-Temp Brake Fluid DOT 3

PRODUCT NUMBER: AS400, AS400Y, AS401, AS401Y, AS402, AS402-6, AS403, AS405, AS455

FORMULA NUMBER: 436, 2075-28, 2075-36, 2276-69, 2396-88, 310, 345, 360, 2488-67

MANUFACTURER:

Prestone Products Corporation

Danbury, CT 06810-5109

CANADIAN OFFICE:

FRAM Group (Canada), Inc.

Mississauga, Ontario L5L 3S6

MEDICAL EMERGENCIES AND ALL OTHER INFORMATION PHONE NUMBER:

(800)890-2075 (in the US)

(800)668-9349 (in Canada)

TRANSPORTATION EMERGENCY PHONE NUMBER (Chemical Spills and Transport Accidents only):

CHEMTREC 1-800-424-9300 (in the US)

CANUTEC (613)996-6666 (in Canada)

MSDS DATE OF PREPARATION/REVISION: 04/25/2012

PRODUCT USE: Automobile brake fluid – consumer product

2. Hazards Identification

Clear amber liquid with a mild odor.

EMERGENCY OVERVIEW

Eye contact may cause irritation with possible corneal injury. May cause mild skin irritation or sensitization. Harmful if

absorbed through the skin. Breathing high concentrations of vapors or mists may cause irritation, headache, dizziness,

drowsiness, nausea, loss of sense of balance and visual disturbances. Swallowing may cause gastrointestinal disturbances

including irritation, abdominal pain, back pain, nausea, vomiting, diarrhea, headache, dizziness, drowsiness, nausea, visual

disturbances, decreased urine production, malaise, unconsciousness and liver or kidney damage. May cause chronic effects.

3. Composition/Information On Ingredients

Component CAS No. Amount

Triethylene glycol monobutyl ether 143-22-6 20-75%

Triethylene glycol monomethyl ether 112-35-6 0-30%

Triethylene glycol monoethyl ether 112-50-5 0-40%

Tetraethylene glycol monobutyl ether 1559-34-8 0-15%

Diethylene glycol monobutyl ether 112-34-5 1-30%

Diethylene glycol monoethyl ether 111-90-0 0-2%

Tetraethylene glycol 112-60-7 0-20%

Diethylene glycol 111-46-6 0-60%

Triethylene glycol 112-27-6 0-20%

Polyethylene glycol 25322-68-3 0-20%

Polyethylene glycol monomethyl ether 9004-74-4 0-20%

Polyethylene glycol monobutyl ether 9004-77-7 0-20%

Polyethylene glycol monoethyl ether 27879-07-8 0-5%

Pentaethylene glycol monobutyl ether 23601-39-0 0-5%

Pentaethylene glycol 4792-15-8 0-10%

Sodium phosphate 7601-54-9 0-5%

Diisopropanolamine 110-97-4 0-5%

Methyldiethanolamine 105-59-9 0-5%

Summary of content (7 pages)

PAGE 1
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 MATERIAL SAFETY DATA SHEET 1. Product And Company Identification MSDS ID: MSDS042 PRODUCT NAME: PRODUCT NUMBER: FORMULA NUMBER: Prestone® Hi-Temp Brake Fluid DOT 3 AS400, AS400Y, AS401, AS401Y, AS402, AS402-6, AS403, AS405, AS455 436, 2075-28, 2075-36, 2276-69, 2396-88, 310, 345, 360, 2488-67 MANUFACTURER: Prestone Products Corporation Danbury, CT 06810-5109 CANADIAN OFFICE: FRAM Group (Canada), Inc.
PAGE 2
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 Component Inhibitor package CAS No. Mixture Amount 0-2% (See Section 8 for Exposure Limits) 4. First Aid Measures INHALATION: Remove to fresh air if effects occur and seek medical attention. SKIN CONTACT: Remove contaminated clothing. Wash all affected and exposed areas with soap and water. If skin irritation or redness develops or persists, seek medical attention.
PAGE 3
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 7. Handling and Storage Avoid eye contact. Avoid prolonged skin contact. Avoid breathing vapors and mists. Use with adequate ventilation. Wash exposed skin thoroughly with soap and water after use. Keep away from excessive heat and open flames. Do not add nitrites or other nitrosating agents. Nitrosamine, which may cause cancer, may be formed. Keep containers closed when not in use. Store in a cool, dry area.
PAGE 4
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 EYE PROTECTION: Splash proof goggles are recommended to prevent eye contact. OTHER PROTECTIVE EQUIPMENT/CLOTHING: Protective clothing if needed to avoid prolonged/repeated skin contact. Suitable washing and eye flushing facilities should be available in the work area. Contaminated clothing should be removed and laundered or dry cleaned before re-use. 9. Physical and Chemical Properties APPEARANCE AND ODOR: Clear amber or yellow liquid, mild odor.
PAGE 5
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 CHRONIC HAZARDS: Prolonged or repeated skin contact with this product may possibly lead to irritation and dermatitis. Prolonged or repeated exposures may cause damage to the central nervous system, blood, lung, liver or kidneys. Adverse reproductive effects may also occur. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: May aggravate pre-existing skin, blood, lung, liver and kidney disorders.
PAGE 6
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 CANADIAN TDG CLASSIFICATION PROPER SHIPPING NAME: Not Regulated ID NUMBER: N/A HAZARD CLASS: N/A PACKING GROUP: N/A LABELS REQUIRED: N/A PLACARDS REQUIRED: N/A 15.
PAGE 7
MSDS042 HI-TEMP BRAKE FLUID DOT 3 Date Prepared: 04/25/2012 REVISION SUMMARY: Section 1, 3, 8, 11: Addition of formula. This MSDS is directed to professional users and bulk handlers of the product. Consumer products are labeled in accordance with Federal Hazardous Substances Act regulations.