MSDS

ManualsBrandsPrestone ManualsTools & Hardware12 oz. Asian Power Steering Fluid

MSDS633

PRESTONE POWER STEERING FLUID

FOR ASIAN VEHICLES

Date Prepared: 12/21/11

Page 1 of 5

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification

MSDS ID: MSDS633

PRODUCT NAME: Prestone® Power Steering Fluid for Asian Vehicles

PRODUCT NUMBER: AS-269, AS-269Y

FORMULA NUMBER: 2479-009

MANUFACTURER:

Prestone Products Corporation

Danbury, CT 06810-5109

CANADIAN OFFICE:

FRAM Group (Canada), Inc.

Mississauga, Ontario L5L 3S6

MEDICAL EMERGENCIES AND ALL OTHER INFORMATION PHONE NUMBER

(800)890-2075 (in the US)

(800)668-9349 (in Canada)

TRANSPORTATION EMERGENCY PHONE NUMBER (Chemical Spills and Transport Accidents only):

CHEMTREC 1-800-424-9300 (in the US)

CANUTEC (613)996-6666 (in Canada)

MSDS DATE OF PREPARATION/REVISION: 12/21/11

PRODUCT USE: Automobile fluid – consumer product

2. Hazards Identification

Amber liquid with a mild petroleum odor.

EMERGENCY OVERVIEW

May cause mild transient eye and skin irritation. Prolonged skin contact may cause mild irritation. Oil injection into the skin

from high-pressure hydraulic systems may cause severe injury. Most damage occurs during the first four hours. Seek medical

attention immediately. Surgical removal may be necessary. Breathing high vapor concentrations may cause headache,

dizziness, drowsiness or lung irritation. If the product is swallowed, aspiration may occur resulting in lipid pneumonitis.

3. Composition/Information On Ingredients

Component CAS No. Amount

Highly-refined petroleum lubricant oils Proprietary 30 - 60%

1-Decene trimer, hydrogenated 68649-12-7 5 - 40 %

1-Decene homopolymer, hydrogenated 68037-01-4 5 - 40 %

(See Section 8 for Exposure Limits)

4. First Aid Measures

INHALATION: If symptoms of exposure develop, remove to fresh air. If symptoms persist, or breathing becomes difficult,

have qualified personnel administer oxygen. Seek immediate medical attention.

SKIN CONTACT: If burned by hot material, Cool skin by quenching with large amounts of water. For contact at ambient

temperatures: Remove contaminated clothing. Wash all affected and exposed areas with soap and water. If skin irritation or

redness develops and persists, seek medical attention. High pressure injection of this product through the skin is a medical

emergency. This product must be removed completely from under the skin. Seek immediate medical attention.

Summary of content (5 pages)

PAGE 1
MSDS633 PRESTONE POWER STEERING FLUID FOR ASIAN VEHICLES Date Prepared: 12/21/11 MATERIAL SAFETY DATA SHEET 1. Product And Company Identification MSDS ID: PRODUCT NAME: PRODUCT NUMBER: FORMULA NUMBER: MSDS633 Prestone® Power Steering Fluid for Asian Vehicles AS-269, AS-269Y 2479-009 MANUFACTURER: Prestone Products Corporation Danbury, CT 06810-5109 CANADIAN OFFICE: FRAM Group (Canada), Inc.
PAGE 2
MSDS633 PRESTONE POWER STEERING FLUID FOR ASIAN VEHICLES Date Prepared: 12/21/11 EYE CONTACT: Exposed eyes should be immediately flushed with copious amounts of water using a steady, low-pressure stream for several minutes. After the first few minutes, remove contact lenses, if present and easy to do so, then continue flushing eyes. If irritation, pain, swelling or tearing persist, seek medical attention.
PAGE 3
MSDS633 PRESTONE POWER STEERING FLUID FOR ASIAN VEHICLES Date Prepared: 12/21/11 8.
PAGE 4
MSDS633 PRESTONE POWER STEERING FLUID FOR ASIAN VEHICLES Date Prepared: 12/21/11 11. Toxicological Information POTENTIAL HEALTH EFFECTS: ACUTE HAZARDS: INHALATION: At elevated temperatures or in enclosed spaces, product mist or vapors may irritate the mucous membranes of the nose, the throat, bronchi, and lungs; based on data from similar products. SKIN CONTACT: Prolonged contact may cause mild irritation.
PAGE 5
MSDS633 PRESTONE POWER STEERING FLUID FOR ASIAN VEHICLES Date Prepared: 12/21/11 IMDG CODE SHIPPING CLASSIFICATION: Not Regulated CANADIAN TDG CLASSIFICATION: Not Regulated 15.