MSDS

ManualsBrandsPrestone ManualsTools & Hardware12 oz. Asian Power Steering Fluid

SDS633

PRESTONE POWER STEERING FLUID

FOR ASIAN VEHICLES

Date Prepared: 05/07/14

Page 3 of 5

7. Handling and Storage

PRECAUTIONS FOR SAFE HANDLING:

Avoid contact with the eyes. Avoid prolonged or repeated contact with skin and clothing. Avoid breathing vapors or mists.

Use with adequate ventilation. Wash exposed skin with soap and water after use.

High pressure injection of this product through the skin is a medical emergency.

Empty containers retain product residue and may be hazardous. Do not cut, weld, drill, etc. containers, even empty. Do not

reuse empty containers unless properly cleaned.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:

Keep container away from excessive heat and open flames. Keep containers closed when not in use. Store in a cool, dry, well-

ventilated area.

NFPA CLASSIFICATION: IIIB

8. Exposure Controls / Personal Protection

EXPOSURE GUIDELINES

CHEMICAL EXPOSURE LIMIT

Highly-refined petroleum lubricant oils

(As mineral oil mist)

5 gm/m

OSHA PEL

5 mg/m

ACGIH TLV (Inhalable)

1-Decene trimer, hydrogenated

(As mineral oil mist)

5 gm/m

OSHA PEL

5 mg/m

ACGIH TLV (Inhalable)

1-Decene homopolymer, hydrogenated

(As mineral oil mist)

5 gm/m

OSHA PEL

5 mg/m

ACGIH TLV (Inhalable)

APPROPRIATE ENGINEERING CONTROLS: None needed under normal use conditions. For operations where the

exposure limit is exceeded, forced ventilation such as local exhaust is required.

PERSONAL PROTECTIVE EQUIPMENT

RESPIRATORY PROTECTION: None under normal use conditions. For operations where exposure limits are exceeded, a

NIOSH approved respirator with an organic vapor cartridge and a dust/mist prefilter or supplied air respirator is recommended.

Equipment selection depends on contaminant type and concentration. Select in accordance with 29 CFR 1910.134 and good

industrial hygiene practice.

GLOVES: Impervious gloves such as heavy nitrile are recommended where prolonged skin contact may occur. Use heat-

resistant gloves when handling product at elevated temperatures.

EYE PROTECTION: Safety glasses or chemical splash goggles are recommended.

OTHER PROTECTIVE EQUIPMENT/CLOTHING: Appropriate protective clothing as needed to minimize skin contact.

Suitable eye flushing facilities should be available in the work area. Contaminated clothing should be immediately removed

and laundered before re-use.

9. Physical and Chemical Properties