User's Manual

2. Operation
.
A. Camera Connections and Mounting
a. Secure the V+F Lens Control to the Matte Box Support Rods using the Mounting Bracket.
The jaw opening is adjusted to accommodate different rod sizes by turning the free half of
the bracket as shown in the picture above.
b. The V+F unit can be powered directly from the camera, or through a separate power
cable. The cables for connection to the camera are p/n 4620 ~ 4630, and the power cables
are p/n 4640, and 4641. See the complete list of cables in Section 4 of this document.
c. Connect the digital motor (DM-1 or DM-2) with the motor cable (p/n 4410 ~ 4412).
d. Use a Swing Arm Motor Bracket (p/n 4301 ~ 4303, 4333) to attach the motor to the Matte
Box Support Rods. Engage the motor to the lens.
p/n 4050 Wireless Version p/n 4051 Cable Only Version
VLC Receptacles
Mounting Bracket p/n 4342